SKORPION 250 SDT is a perfect choice for people involved in community service activities, for road companies and for forest sector. Because of its high processing capacity (the maximum diameter of the cut branches is 25 cm), it is excellent for chipping tree trunks and large branches; the throat of the model is 420 mm wide and 255 mm high.

The drive system of this chipper is optionally a four-cylinder, turbocharged Kohler diesel engine (74,8 hp) or Hatz (74,8 hp); it is liquid-cooled and as a standard fitted with a mask.

The cutting system in Skorpion 250 SDT is made by a disc equipped with two or three cutting blades, working with two counter knives. The cutting knives life has been optimized by their double-sided sharpening, which allows them to be rotated by 180°, resulting in twice the length of their use. All the knives are made of appropriately selected tool steel and subjected to professional heat treatment. In addition, the chipper disc also fulfills the task of a fan and ejects the produced chips through the ejection tube, which can be positioned in any direction at a full 360° radius.

Safety of the operator of a chipper is ensured by a cable safety switch attached, which - by pulling the cord in any direction - causes the hydraulic feed system to stop immediately. Unlocking the system takes place by releasing / unlocking the EMERGENCY STOP button to the work position.

Skorpion 250 SDT is equipped with one of the most modern electronic No-stress systems available on the European market; the system automatically prevents overloading of the drive system by temporarily stopping the feeding. Editing the No-stress overload system allows you to easily change the machine settings and adjust them to individual needs.

The Skorpion 250 SDT chopper has received European approval, which permits registration of the machine and traffic approval. It is equipped with overrunning brake and parking brake, LED traffic lights and a choice of spherical or eye catch.

Overall dimensions (L x W x H) 4600 x 2010 x 2520 [mm]
Weight 1770 [kg]
Branch diameter 250 [mm]
No of knives 2 or 3 cutting + 2 counter-knife
Feeding speed up to 42 [running meters/min]
Chipping capacity up to 22 [stère meters/h]
Chip width from 9 to 14 [mm]
Feeding unit hydraulic feeder
Disk diameter 800 [mm]
Hopper dimensions (width x height) 420 x 255 [mm]

ENGINE TECHNICAL DATA
Engine model KOHLER KDI2504TCR / HATZ 4H50TICD
Engine cubic capacity 2482 / 1952 [cm3]
Power of engine 74,8 [hp]
Type of cooling liquid
Type of fuel diesel
Fuel tank capacity 60 [l]
Start-up electric

Equipment included:
- Counter of operating hours
- Spare wheel
- Adjustment of height of ejecting the chips
- Rotary chimney 360°
- No-stress system

Additional accessories on request:
- Extension of the ejection tube